高级检索
杨启杰, 李波, 肖勇, 黄斌, 戴建树. 中厚板T形接头拐角焊缝机器人焊接工艺的研究[J]. 金属加工（热加工）, 2017, (12): 10-13. DOI: 10.3969/j.issn.1674-165X.2017.12.002
引用本文: 杨启杰, 李波, 肖勇, 黄斌, 戴建树. 中厚板T形接头拐角焊缝机器人焊接工艺的研究[J]. 金属加工（热加工）, 2017, (12): 10-13. DOI: 10.3969/j.issn.1674-165X.2017.12.002
shu
The research of the welding process of welding robot in the corner of the thick plate T - Shaped Weld Seam[J]. MW Metal Forming, 2017, (12): 10-13. DOI: 10.3969/j.issn.1674-165X.2017.12.002
Citation: The research of the welding process of welding robot in the corner of the thick plate T - Shaped Weld Seam[J]. MW Metal Forming, 2017, (12): 10-13. DOI: 10.3969/j.issn.1674-165X.2017.12.002
shu

中厚板T形接头拐角焊缝机器人焊接工艺的研究

The research of the welding process of welding robot in the corner of the thick plate T - Shaped Weld Seam

    摘要
  • 摘要: 本文以选用弧焊机器人焊接T形接头90°拐角焊缝为例,针对中厚板T形接头90°拐角焊缝处易产生堆积凸起、未熔合、脱节、咬边等缺陷,通过分析焊接轨迹点的设置、选用的焊接参数、焊枪角度等对焊缝质量的影响,进行了机器人焊接工艺的试验,优化了焊接轨迹点的设置、焊接参数、焊枪角度等.结果表明,正确设置焊接轨迹点、合理选用焊枪摆动功能及焊接参数等,提高了焊缝质量和效率,降低成本.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回