高级检索
刘国辉, 银润邦, 李占雷, 朱超兵, 郑周. 不同固溶处理工艺对N08120镍合金性能的影响[J]. 金属加工（热加工）, 2024, (2): 92-95. DOI: 10.3969/j.issn.1674-165X.2024.02.016
引用本文: 刘国辉, 银润邦, 李占雷, 朱超兵, 郑周. 不同固溶处理工艺对N08120镍合金性能的影响[J]. 金属加工（热加工）, 2024, (2): 92-95. DOI: 10.3969/j.issn.1674-165X.2024.02.016
shu
Effect of different solid solution heat treatment processes on the properties of N08120 nickel alloy[J]. MW Metal Forming, 2024, (2): 92-95. DOI: 10.3969/j.issn.1674-165X.2024.02.016
Citation: Effect of different solid solution heat treatment processes on the properties of N08120 nickel alloy[J]. MW Metal Forming, 2024, (2): 92-95. DOI: 10.3969/j.issn.1674-165X.2024.02.016
shu

不同固溶处理工艺对N08120镍合金性能的影响

Effect of different solid solution heat treatment processes on the properties of N08120 nickel alloy

    摘要
  • 摘要: 研究了1110～1190℃固溶处理工艺对N08120镍合金钢板的力学性能和组织的影响.结果表明:随着固溶处理温度的提高,合金的塑性和表面耐蚀性变好;在1190℃下,随着固溶时间的增加,合金的塑性和表面耐蚀性先变好再变差.

     

    Abstract: Investigated the effect of solid solution heat treatment process at 1110～1190℃on the mechanical properties and microstructure of N08120 nickel alloy steel plate.The results show that as the solution treatment temperature increases,the plasticity and surface corrosion resistance of the alloy improve;Below 1190℃,as the solid solution time increases,the plasticity and surface corrosion resistance of the alloy first improve and then deteriorate.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回