高级检索
马龙飞, 高玉廷, 王彦招, 索新柱, 刘志伟, 王亮亮, 樊红岩, 高颂庆, 白璐, 李芳斌. NT70型共用平车中梁盖板自动焊接工艺优化[J]. 金属加工（热加工）, 2024, (4): 75-79. DOI: 10.3969/j.issn.1674-165X.2024.04.016
引用本文: 马龙飞, 高玉廷, 王彦招, 索新柱, 刘志伟, 王亮亮, 樊红岩, 高颂庆, 白璐, 李芳斌. NT70型共用平车中梁盖板自动焊接工艺优化[J]. 金属加工（热加工）, 2024, (4): 75-79. DOI: 10.3969/j.issn.1674-165X.2024.04.016
shu
Optimization of automatic welding process for middle beam cover plate of NT70 common flat train[J]. MW Metal Forming, 2024, (4): 75-79. DOI: 10.3969/j.issn.1674-165X.2024.04.016
Citation: Optimization of automatic welding process for middle beam cover plate of NT70 common flat train[J]. MW Metal Forming, 2024, (4): 75-79. DOI: 10.3969/j.issn.1674-165X.2024.04.016
shu

NT70型共用平车中梁盖板自动焊接工艺优化

Optimization of automatic welding process for middle beam cover plate of NT70 common flat train

    摘要
  • 摘要: 介绍了NT70型共用平车中梁盖板焊接时的主要焊接缺陷和提高焊接质量的解决措施,以及如何采用高效的焊接方法提升工作效率和降低员工劳动强度.

     

    Abstract: This paper introduces the main welding defects during the welding of the middle beam cover plate of NT70 common flat train and the solutions to improve the welding quality,as well as how to adopt efficient welding methods to improve the work efficiency and reduce the labor intensity of employees.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回