铸钢件缩孔及缩松缺陷的消除

聂小武. 铸钢件缩孔及缩松缺陷的消除[J]. 金属加工（热加工）, 2007, (1): 57-59.

引用本文:

聂小武. 铸钢件缩孔及缩松缺陷的消除[J]. 金属加工（热加工）, 2007, (1): 57-59.

Elimination of shrinkage cavity and dispersed shrinkage in cast steel parts[J]. MW Metal Forming, 2007, (1): 57-59.

Citation:

Elimination of shrinkage cavity and dispersed shrinkage in cast steel parts[J]. MW Metal Forming, 2007, (1): 57-59.

Elimination of shrinkage cavity and dispersed shrinkage in cast steel parts

摘要: 通过分析铸钢件缩孔及缩松产生的机理,总结出铸件产生缩孔及缩松缺陷的部位,提出从改进浇注系统、改变铸件结构、适当提高浇注温度及控制浇注速度等几个方面消除铸件中的缩孔及缩松.

用微信扫码二维码

分享至好友和朋友圈